3 Pack of Pure Enzymes for SPAS - 3 month supply

Easy Instructions

1. Start with clean, clear water or purge with Clean & Drain and refill with clean water. (no irrigation water).
2. Turn your swim spa on and set filtration to a minimum of 8 hours/day (first 6 weeks).
3. Set heat to desired temperature.
4. Check pH and alkalinity and adjust if needed. Add 1 capful of pH product, run spa for 1 hour, then retest. Adjust again, accordingly.
5. Wait for spa to warm up.
6. Check pH and alkalinity again and adjust if needed. (Check frequently in the first month until pH stays stabilized, then check once a week.)
7. Add 1 bottle of Waters Choice 12 oz. PURE ENZYMES for SWIM SPAS. This enzyme treatment is doing most of the work keeping your spa clean. Make sure to add another bottle every month thereafter!
8. Add Waters Choice Sanitizer (granular chlorine). Follow recommended label rates. (We recommend adding 1 Tbl every other use.)
9. CLEAN filters (with high-pressure hose) 1x per week for the first 6 weeks! After that, clean every other week.
10. Use your new swim spa!
11. When using Waters Choice enzymes in your swim spa, you only need to clean and drain it every 3-5 years, instead of every year on a traditional system.
12. If at any time you have questions about your water care, please contact support@waterschoice.comor text us through our chat bubble in the lower left hand corner.

This enzyme treatment is formulated for spas up to 2000 gallons. You may need to add a little more of this enzyme treatment, depending on how much use your swim spa is getting.

Always feel free to reach out to us with any questions you may have.