EASY STARTUP INSTRUCTIONS
When starting a pool on Waters Choice Pool Polish, (enzymes), make sure your pH is between 7.2 and 7.6, your total alkalinity needs to be between 80 and 120, and you should have a chlorine reading between .5 and 1 part per million.
Start with clean filters. If your filters are dirty the enzymes will be working to clean them up pulling from the pool itself.
Check your phosphate levels. If your pool is above 200 parts per billion you will need to bring them down with a phosphate remover. Once you have your levels under 200 ppb retest ½ way through the season and just before you close your pool. If you have phosphates in your fill water retest monthly.
Add one bottle of Waters Choice Pool Polish, (enzymes) for pools up to 25,000 gallons of water. If your pool is less than 25,000 you can add less. The numbers will not equate equally. If you have a 5,000 gallon pool add 1/3 of the bottle, 10,000 gallons add ½, and 15,000 add ¾ of the bottle. These dosages are per month.
Test your pH, alkalinity, and chlorine and make sure to keep in the desired ranges.
Vacuum and brush your pool.
Check pressure on filter.
Add one bottle, (or correct dosage per your pool size), of Waters Choice Pool Polish, (enzymes).
Closing your pool:
If you winterize your pool add one bottle of Waters Choice Pool Polish, (enzymes), blow out your lines, and cover.
It is a good practice to check your water in March to see if it is starting to turn green, (especially with mesh covers).
If you turn off your heater, keep your equipment running, but do not use your pool add ½ a bottle of Waters Choice Pool Polish, (enzymes) every 6 weeks. Cut back on your chlorine.