Spa Startup Kit - 1 Month Supply, Ultra Natural Sanitation System

Easy Instructions

1. Start with clean water that is less than 60 days old or purge with Clean & Drain and refill with clean water.
2. Turn spa on and set filtration to a minimum of 8 hours/day (first 6 weeks).
3. Set heat to desired temperature.
4. Check pH and alkalinity and adjust if needed. (Add 1 capful of pH Up or pH Down (whichever is needed), wait one hour, then retest). Continue to this process until the pH is balanced.
5. When spa is up to temperature, check pH and alkalinity again and adjust if needed. (Check frequently in the first month until the pH stays stabilized, then check once a week.)
6. Add one bottle of Waters Choice 12 oz. PURE ENZYMES for Spas. This is the enzyme that will do most of the work keeping your spa clean. Make sure to add another bottle every month thereafter!
7. Add Waters Choice Sanitizer (granular chlorine). Follow recommended label rates. (We recommend adding 2 tsp. every other use.)
8. CLEAN filters (with high pressure hose) once a week for the first 6 weeks! After that, clean every other week.
9. Use your new spa.
10. Note: Most spas develop cloudy water during the first month. This is normal.
11. VERY IMPORTANT – Let the cloudy phase run its course. Add 2 tsp. Sanitizer (granular chlorine) every other time you use the hot tub.
12. If at any time you have questions about your water care, please contact support@waterschoice.comor text us through our chat bubble in the lower left hand corner.